Bolt on Front Shock Mount Gusset
Bolt on gusset for added strength and a piece of mind when riding hard
Can be used solely or in conjunction with the DLP Shock Brace
Made of thick tig welded steel
Uncoated for fitment purposes which also gives you the option to weld it to the frame
This gusset is installed from the bottom of the frame tubes to help prevent shock mount frame failures
All installation hardware is included
Upgrade your factory upper and lower shock bolts to much stronger bolts by selecting the Bolt Upgrade option
MADE IN THE U.S.A.
Dirt Launch Powersports Yamaha YXZ1000R Shock Tower Brace Installation Instructions
Remove the small hood plastic
Remove the plastic panel covering the shock tower
Install the gusset by sliding the long end up through the frame from the bottom (Flat side facing forward) with the nut and bolt supplied. Note: use loctite or equivalent
Note: Some minor massaging may be required on the gussetdue to the chassis differences from factory
Bolt upgrade option- (if selected in checkout)
Replace the oem upper and lower shock mounting bolts with the much stronger upgraded bolts. Reusing the oem nuts
⚠WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov