Loading... Please wait...

Our Newsletter


Dirt Launch Powersports Shock Tower Brace: Yamaha YXZ1000R

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
RRP:
$399.99
Your Price:
$299.99 (You save $100.00)
Rating:
Quantity:


Made from CNC billet aluminum the Dirt Launch Powersports Shock Tower Brace is the easy bolt-on solution to adjusting your shock mounting position.  Installs in just a few minutes and provides an immediate improvement in suspension geometry.  

All installation hardware is included 

 

Here's what Luke says about our Shock Tower Brace: "Our DLP shock relocation bracket moves the upper end of the front shocks out and up. Because it moves it out, the upward movement negates any ride height difference. By moving the shocks out it puts the leverage on the control arm more perpendicular to the arm, less parallel than the stock mount does. This is especially true at full compression. While this does increase the leverage on the stock mount, it also decreases the amount of force applied especially at the limits. The brace also stiffens the stock mount and the extra bolt underneath reduces flex. What you will notice by just bolting this on is the suspension will feel stiffer and more responsive when cornering and also a bit stiffer when jumping. The most noticeable part is when landing. When the suspension is at full compression, it just doesn't give up like it would stock. It is controlled all the way through the landing."

 

In stock and ready for immediate shipment.  

 

Dirt Launch Powersports Yamaha YXZ1000R Shock Tower Brace Installation Instructions

  1. Remove the plastic cover over the radiator.

  1. Remove the M10 head bolt from the plastic cover going over the shock tower. Trim the plastic over the shock tower to make room for the brace.

  1. Safely lift the front of the vehicle and place on jack stands.

  1. *IMPORTANT* VERIFY FRONT SUSPENSION IS UNCOMPRESSED.

  1. Remove the top mounting bolts from the front shocks.

  1. Mount the shock brace to the chassis with the two bolts removed in step 5.

  1. Install the small bolt supplied in the kit from the bottom side of the shock mount into the center of the shock brace.

  1. Once those are all tight, attach the top of the shocks to the brace using the long bolts supplied in the kit.

  1. Verify everything is tight, lower vehicle, and enjoy!


Find Similar Products by Category


Write your own product review

Product Reviews

  1. good quality 5 Star Review

    Posted by on 4th Jul 2018

    This piece is made to take a beating. It also fits like a glove. Wish it came with bolts and directions on where to cut the plastic.



Add to Wish List

Click the button below to add the Dirt Launch Powersports Shock Tower Brace: Yamaha YXZ1000R to your wish list.

You Recently Viewed...